RPi on 19" rach mount chassis testing notes

Now I am testing the RPi with Guzunty Pi.  I uploaded the gz_test.xsvf, then executed the gztest.o.  Everything went smoothly.  The LEDs toggle as expected.  So the following should be OK.

1. JTAG connection.

2. SPI connection.

3. CLK0 signal.


.END


*** Guzunty Pi record ***

login as: pi
pi@192.168.1.40's password:
Linux raspberrypi 3.6.11+ #464 PREEMPT Thu Jun 6 18:17:55 BST 2013 armv6l
...
pi@raspberrypi ~ $ cd Guzunty
pi@raspberrypi ~/Guzunty $ cd Pi
pi@raspberrypi ~/Guzunty/Pi $ cd src
pi@raspberrypi ~/Guzunty/Pi/src $ cd gz_test
pi@raspberrypi ~/Guzunty/Pi/src/gz_test $ sudo gz_load gz_test.xsvf
Guzunty loader v5.01, portions courtesy Xilinx, Inc.
XSVF file = gz_test.xsvf
SUCCESS - Completed XSVF execution.
Execution Time = 10.510 seconds
pi@raspberrypi ~/Guzunty/Pi/src/gz_test $ sudo ./gz_test

Press any key to stop test.

pi@raspberrypi ~/Guzunty/Pi/src/gz_test $ date Sun Jun 30 09:19:20 UTC 2013

.END